EPS Foam Cold Press Recycling Machine is mainly used to compact packaging waste ,such as fish boxes , foam board,foam block etc., which compacting ratio is of 50:1 . With this foam redution machine,bulky foam waste would not occupy such a large storage space,bust aslo facilitate the transport and handing,which means user could save large strorage and transportation cost and recreate new value highly from Waste EPS.
Feature of EPS Foam Cold Press Recycling Machine
1.Twin shaft crushing blades. EPS Foam Fuse Machine adopts manual feeding, the material will be crushed
by the twin shaft blades and conveyed to the barrel of the main machine through the screen.
2.The screw of the main machine can convey and heat the material to melt condition, then extrude them and
hydraulic blade cut them to pieces for easy storage and transportation.
3.The shapes of the products can be designed according to customers' requirements.
EPS and the Environment:
1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.
2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.
3.Although EPS is derived from a non-renewable resouce - oil, it represents less than 0.1% of crude oil usage.
4. As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.
Technical Parameters of EPS Foam Cold Press Recycling Machine:
|Feeding hopper size||665x430MM||960X585MM|
|EPS block dimension||250x250mm||370x370mm|
Photos of EPS Foam Cold Press Recycling Machine: